500ml scented wax warmer kit for wax bath therapy with 100W power
wax warm with led display
designed for hand and foot care, quickly melting both paraffin wax and depilatory wax treat skin
with immediate effect.
After treatment, the skin will be whitening, delicate, shiny and
full of flexibility.
|type||YM-8429 depilatory waxheater|
|Voltage:||110-120V 220-240V 50Hz/60Hz|
|packing detial:||poly bag + white box + carton|
|packing size||63x41x32.5cm 12pcs Nw:9kg Gw:9.8kg|
|temperature control||circuit board|
|wax melting time||about 45min|
- Place the collar ring on the rim of the SPA.
- Remove the plastic lid from the WAX SPA.
- Adjust the WAX-CAN holder on the wax can for easy handling.
- Turn the temperature control knob and set the dial on MAX(it will
show 135℃ on the digital display) until the wax achieves a liquid
consistency. This process lasts about 30minutes.(it depends on the
- Once liquid, set the temperature to that you want(temperature can
be seen on the digital display)
- It is important to test the temperature of the wax by placing a
small quantity on the inside of wrist, adjusting the dial
- When the wax is finished, lift out the can. Using the wax-can
holder while the warmer is still warm.
- Turn the warmer off every evening by full turning the dial counter
clock wise. Cover the warmer with the clean lid to keep the wax
- To clean the warmer, use wax clean with the machine off and while
the warmer is still slightly warm.
- For a new usage, repeat steps 1 to 8.
- For a better use of the wax machine and lower the chance of scald,
fire, electronic shock or injury, Be careful about the points
listed below, especially when children or the disabled are nearby:
- Do not use the product in a moist places such as toilet or
bathroom. Do not dip the machine into water or any other liquid.
- Do keep the machine flatly on a stable table.
- Do not overhang the cable at the outside of the table in case
people accidentally pull off of the machine. Avoid the cable close
to or touching the heat source
- Do not touch the metal container’s side and bottom in case of
- It is suggested to use the wax from the manufacture of the machine.
(The wax can be purchased from the agent or manufacture) Do not
plug in or plug out with wet hands. Do not lift the machine with
- Do not stand in the container.
- Do not heat the wax by oven or microwave. Do not heat the wax with
the plastic bag on. Never try to add anything into the wax.
This product is not suitable for any burn skin, allergic skin or
skin with any other disease. Do not apply wax on the skin around
the eyes or other sensitive area. If the wax is too hot, please
stop using or use the brush instead of dipping.
1.Q:Are you manufactory or trade company?
A:We are the Manufactory specialized in nail lamps many years,have
more than 100 workers,in Guangzhou,Guangdong province,China.
2.Q:How can I get the samples?
A:If you need some samples to test,we can make as per your request
.You should pay for the transportation freight of samples and our
samples cost,while the samples cost can be refundable after you
place the order.
3.Q:How much the transportation freight of samples?
A:The freight depends on the weight and packing size and your area.
4.Q:How long can I expect to get the sample?
A:The samples will be ready for delivery in 3-5days.The samples
will be sent via express and arrive in 3-5 days.
5.Q:How to order?
A:Please send us your purchase order by Email or Fax,or you can ask
us to send you a proforma invoice for your order.We need to know
the following information for your order before sending you PI.
needed and Packing requirements etc.)
2)Delivery time required.
3)Shipping information-Company name,Street address,Phone&Fax
number,Destination sea port.
4)Forwarder's contact details if there's any in China.
Thank you for your reading. Your inquiry will be answered within 24
hours. Please feel free to contact us,we will be more glad to serve
you. Also,you are warmly welcome to visit our factory. Hope we can
build long term cooperation with you!
Photo of product: